Shmoo Plot Tool for Memory

Shmoo Plot Tool for Memory is an analysis tool used for characteristic evaluation.
This IP can obtain execution results and measured values while changing measurement conditions.

Features

Shmoo Plot Tool

  • Perform the measurement item while changing the measurement conditions according to Shmoo conditions
    • The measurement condition to change can be specified up to two
    • The conditions to change the measurement conditions can be specified from the followings
      • The start value, distance and count
      • Select the measurement condition, and set the amplitude and the offset value
    • Save Shmoo condition to the work project
  • Output the execution result and measurement value to the console and CSV file

Shmoo Algorithm

  • Perform the measurement item while changing the measurement conditions according to Shmoo conditions
  • Output measurement result to the console and a file

Add to Cart

Product GroupAnalysis IP
CodePCXT01-M8001
Link
ManufacturerADVANTEST CORPORATION
Applicable Equipment
  • CX1000P MEMORY_TYPE_F
  • CX1000D MEMORY_TYPE_F
Current and Voltage Measurements for Memory

Functional Testing for Memory

Power Supply Current Measurement for Memory

Revisions

Released atNumberDescription
February 03, 20202.41.00

Shmoo Algorithm

  • Fixed issues

    1. The specified measurement values could not be obtained when using Shmoo axis conditions before Rev 2.41.00.
      [Behavior after improvement]
      In the condition above, measurement values can be obtained.
      [Revisions in which this phenomenon occurs]
      Rev 2.41.00

Shmoo Plot Tool

  • Fixed issues

    1. The measurement results were not displayed when re-executing the measurement at any point of the Shmoo result.
      [Behavior after improvement]
      In the condition above, the measurement results are displayed.
      [Revisions in which this phenomenon occurs]
      Rev 2.41.00
January 16, 20202.41.00
  • Addition of functions

    1. Supported Initial and Final settings of pre-processing and post-processing items.
    2. Added the function to stop analysis processing when the results of pre-processing and post-processing items are Fail or Error.
    3. Added the function to select the measurement items for acquiring Shmoo results.
    4. Supported the function to output the data log of the measurement items during acquisition of Shmoo data.
  • Improved functions

    1. Improved to re-evaluate parameter variables before execution.
May 09, 20162.25.00
  • Fixed issues
    1. When executing the Shmoo again soon after stopping the Shmoo execution, the Shmoo data could not be obtained correctly.

      Behavior after improvement
      In the condition above, Shmoo can be obtained correctly.
      Revisions in which this phenomenon occurs
      Rev 1.00.00 to Rev 2.24.00
    2. After the Shmoo Plot was started, an error occurred when the measurement item with the changed signal conditions was executed.

      Behavior after improvement
      In the condition above, the measurement item is executed properly.
      Revisions in which this phenomenon occurs
      Rev 2.24.00
    3. The Shmoo results were cleared after executing the measurement item.

      Behavior after improvement
      In the condition above, the Shmoo results are not cleared.
      Revisions in which this phenomenon occurs
      Rev 2.24.00
March 18, 20162.24.00
  • Addition of functions
    • The variables can be specified for X-axis and Y-axis parameters.
  • Improved functions
    • Improved the way to specify the measurement conditions for analysis algorithm shmoo.

Related Post

November 10, 2016
Embedded Technology 2016

CloudTesting™ Service will be demonstrated at our customer’s booth, Embedded Technology 2016.