CloudTesting™ Lab 2.30.00

CloudTesting™ Lab Rev 2.30.00

1. Summary of revision

  • Revision number Rev 2.30.00
  • Reason for revision
    Addition of function, Functional improvement, Fixing issue

2. Addition of functions

2.1 Message Display Area

(1) Additional functions of log saving
Supported the following functions:

  • Variables and environment variables can now be specified in the path name of the log file
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F
  • Log files can now be overwritten
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL

2.2 variable

(1) Addition of system variables
The following system variables were added:

  • _SYS_WorkProjectPath
  • _SYS_WorkProjectName
  • _SYS_FlowExecuteCount

Refer to the manual for details of the above system variables.

Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

(2) Addition of engineering unit that can be used in arithmetic expression
The following engineering units can now be specified:

  • F(Farad), R(Ohm), W(Watt)
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

2.3 CT Command

(1) Addtion of CT_MessageAreaSetOverwriteLogFile.bat
CT_MessageAreaSetOverwriteLogFile.bat was added.
Refer to the manual for details of this command.

Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

3. Improved functions

3.1 Setup and Execution

(1) Improvement of execution time
Measurement time has been shortened by improving the application efficiency of signal and power condition.
If multiple condition blocks are set for the same channel, the setting of the lowest block is applied. However, it does not apply if the content already applied is the same as the applicable content.

Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

(2) Improvement of error check during signal condition importing
Error handling while importing signal conditions has been improved. - If an undefined pin name or pin group name is specified, an error occurs. - Error messages have been improved.

Target firmware
CX1000_MCU

3.2 Work project

(1) Improvement of loading speed for work project
The loading speed of work project has improved by up to 30%.

Target firmware
CX1000_MCU

3.3 Message Display Area

(1) Improvement of functions for log saving
The following functions have been improved:

  • The initial setting of the log saving folder is now the folder of the work project to be worked on.
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F
  • The setting of the log destination is now reflected at the next startup.
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL
  • The log storage destination folder and file name can be set separately.
Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL

3.4 Variables

(1) Arithmetic expression specification to array index number
Arithmetic expressions can now be specified as array index numbers.

Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

3.5 CT Command

(1) Improvement of CT_WorkProjectShowIPInfo.bat
If CloudTesting (TM) Lab is running, it can be used even if the main window is not running.

Target firmware
CX1000_MCU, CX1000_MEMORY_TYPE_F

4. Fixed issues

4.1 Setup and Execution

(1) Measurement error occurred when specifying variable as pin names of signal condition
Specifying a variable for the pin names of the signal condition sometimes caused an measurement error.

Behavior after improvement
Even if a variable is specified as pin names of a signal condition, it will not cause an error.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU

4.2 variable

(1) Variables could not be deleted
In some cases it was not possible to delete unused variables.

Behavior after improvement
Unused variables can now be deleted.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F

(2) Pins with the same name as variables could be defined
No error occurred even if a pin with the same name as the defined variable was defined.

Behavior after improvement
An error occurs if a pin with the same name as a variable is defined.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F

(3) Variables not initialized properly
When an array variable with initial value set to the first element is changed to an normal (non array) variable, this variable was no longer correctly initialized.

Behavior after improvement
Variables now intialize properly.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F

4.3 CT Command

(1) Execution result of CT command was not displayed when measurement result is set to [Error] in expert mode
In expert mode, if no run-time error occurred, but the measurement result was set to [Error], the execution result of the CT command to execute the flow was not displayed.

Behavior after improvement
The execution result of the flow is displayed.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F

4.4 Analysis Tools

(1) Some instructions were displayed as NOP in Logic Analyzer
In the cycle using the EXITSC instruction or the DSRCENA option with the logic analyzer, the instruction was displayed as NOP.

Behavior after improvement
The correct instructions are now displayed.

Revisions in which this phenomenon occursTarget firmware
Rev 1.03.00 to Rev 2.28.02CX1000_MCU

(2) An error occurred when executing the interposing function with the analysis tool
An error occurred when executing “Post Interpose” to acquire measured values and results with analysis tool.

Behavior after improvement
In the condition above, no error occur.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F

4.5 Installer

(1) CloudTesting (TM) Lab could not be uninstalled
Uninstalling CloudTesting (TM) Lab when license can not be returned caused an error and could not be uninstalled.

Revisions in which this phenomenon occursTarget firmware
Rev 2.20.00 to Rev 2.28.02CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL