1. Summary of revision
- Revision number
- Rev 2.27.00
- Reason for revision
- Addition of function, Functional improvement, Fixing issue
2. Addition of functions
2.1 Flow Execution (Standard Mode)
(1) The measurement items can be grouped
The multiple measurement items can be grouped. Each group can be selected to execute.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
2.2 IP Manager
(1) Creating a log file
IP Manager creates a log file.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL
2.3 Expert Mode
(1) Algorithm names are additionally saved into list of flow items
Algorithm names are additionally saved into list of flow items.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
(2) Power-off control in list view of flow items
You can edit power-off control in list view of flow items.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
3. Improved functions
3.1 Work Project
(1) Improvement of the error handling for the work project name
Improve error handling when a work project name has invalid characters.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
3.2 Setup and Execution
(1) Displaying [TS] name
Add [TS] name to [TS] display field in signal condition tab.
- Target firmware
- CX1000_MCU
3.3 CT Command
(1) Improvement of execution time
Shorten the overhead time of the execution.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
3.4 Pattern Compile Window
(1) Improvement of the error handling
Improve error handling when a pattern program can not be saved to a folder.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
3.5 IP Manager
(1) Downloading the proper revision of IPs
The revision of the downloaded IPs are the latest one for the using CloudTesting Lab.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL
(2) Selection for using Expert Mode License
You can select to use Expert Mode License.
(Notes on update installation) If all of the following conditions are satisfied, the Expert Mode License is deselected and the startup window is started without Expert Mode.
- IPs to be used are selected in IP Manager settings
- When installing, the installed IPs and IP Manager settings are not deleted
For using the Expert Mode License, select it in the IP Manager Window.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
(3) Improvement of communication via network proxy
Improve to communicate via network proxy.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL
3.6 Expert Mode
(1) Change the initialization rule of Control Word
The initialization rule of Control Word is changed as follows:
- Execute measurement items in flow: Initialize(Unchanged)
- Execute measurement items to be selected: Do not initialize(Changed)
- Execute a measurement item in Analysis Tool: Do not initialize(Unchanged)
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
4. Fixed issues
4.1 Work Project
(1) ‘#’ cannot to be included in work project name
‘#’ could not be included in work project name.
- Behavior after improvement
- ‘#’ can be included in work project name.
- Revisions in which this phenomenon occurs
- Rev 1.00.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
4.2 Setup and Execution
(1) Error dose not occer in the certain pattern execution
No error ocurred in the following conditions.
- The JSR branch destination written in main pattern does not exists in the subroutine patterns.
- Even though the main pattern refers to a subroutine, the subroutine pattern is not specified.
- Behavior after improvement
- In the conditions above, an error occur.
- Revisions in which this phenomenon occurs
- Rev 1.00.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU
(2) Can not be executed SCAN pattern after the executing DSRC pattern
SCAN pattern could not be executed after the executing DSRC pattern.
- Behavior after improvement
- In the conditions above, SCAN pattern can be executed correctly.
- Revisions in which this phenomenon occurs
- Rev 1.00.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU
4.3 Analysis Tools
(1) Change the launch process of analysis tools
An analysis tool can select unexecutable measurement item.
- Behavior after improvement
- An analysis tool can not select unexecutable measurement item.
- Revisions in which this phenomenon occurs
- Rev 1.00.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
4.4 CT Command
(1) Variable can not be deleted
The variable which is set or retrieved by CT Command could not be deleted.
- Behavior after improvement
- The variable can be deleted.
- Revisions in which this phenomenon occurs
- Rev 2.20.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
(2) CT_VariableGet.bat - An array variable of string type cannot be displayed correctly
If an array variable of string type includes empty string element, the empty string could not be displayed in the list.
- Behavior after improvement
- An array variable of string type includes empty string can be displayed in the list correctly.
- Revisions in which this phenomenon occurs
- Rev 2.20.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
(3) CT_WorkProjectOpen.bat cause an error
An error occurred by executing CT_WorkProjectOpen.bat repeatedly.
- Behavior after improvement
- An error do not occur by executing CT_WorkProjectOpen.bat repeatedly.
- Revisions in which this phenomenon occurs
- Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
4.5 IP Manager
(1) The license authentication is unavailable
If CloudTesting ™ Lab was forcibly terminated, authentication of CloudTesting ™ Lab at launch was unsuccessful until Windows restarted.
- Behavior after improvement
- License authentication is performed correctly.
- Revisions in which this phenomenon occurs
- Rev 1.00.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F, CX50_GENERAL
4.6 Expert Mode
(1) Cloud Testing™ Lab hang-up
Cloud Testing™ Lab hung-up on selecting [Execute Select Item & Suspend] menu after editing a signal condition.
- Behavior after improvement
- In the condition above, Cloud Testing™ Lab dose not hang-up.
- Revisions in which this phenomenon occurs
- Rev 2.22.00 to Rev 2.26.00
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F