CTS FUNC Cable(1.0m)

CTS FUNC Cable(1.0m) is a cable to connect CX1000 and your measuring jig. This cable is included power supply channels, I/O channels and more.

Required Cables

All GND / GND_S of CONT / FUNC connector on CloudTesting(TM) Station must be connected to the ground of your measuring jig, regardless of which measurement resource you use. If they are not connected, correct operation of this equipment is not guaranteed.

Required cables for each CloudTesting(TM) Station are bellow:

CloudTesting™ Station Cable
  • 1 FUNC cable
  • 1 CONT cable
  • 4 FUNC cables
  • 1 CONT cable
CX1000D S2-LINK Configuration
  • 8 FUNC cables
  • 2 CONT cables
  • 1 CX1000D S2-LINK Cable Set


Characteristic ImpedanceDesigned for 50ohm
CapacitanceLess than 85pF
DC resistanceLess than 0.5 ohm
I/O dead bandLess than 12.88ns
Usable temperature range-55 °C to 85 °C(Note 1)
Usable relative humidity range40% to 65%(Note 1)
Lifetime of jig side connector500 cyclesDepending on condition.
Lifetime of CloudTesting(TM) Station side connector10,000 cyclesDepending on condition.
Manufacturer code of jig side connectorPCN10-128S-2.54C (receptacle [female]) (Note 2)Manufacturer is HIROSE ELECTRIC

(Note 1) Satisfy usable condition of CloudTesting(TM) Station at CloudTesting(TM) Station side of this cable.

(Note 2) This connector is a product complying to DIN41612/IEC603-2 standard.
For details, please visit HIROSE ELECTRIC website. PCN10-128P-2.54DSA(72) / PCN10-128P-2.54DS(72) manufactured by HIROSE ELECTRIC are one of applicable pin headers.

Add to Cart

Product GroupCable
Applicable Equipment
  • CX1000P CX1000_MCU
  • CX1000D CX1000_MCU
  • CX1000D S2-LINK CX1000_MCU
CTS CONT Cable(1.0m)

CX1000D S2-LINK Cable Set