Measurement facilitation by General I/F(I2C) package IP

Measurement facilitation by General I/F(I2C) package IP is a algorithm IP to read and write the register value via I2C interface.

Feature

  • Read and Write the register value via I2C Interface
  • Measure the current and voltage of I/O channel
  • Measure the frequency of output signal
  • Measure power supply current
  • Generate the free-running clock
  • Read and Write CW
  • Apply a constant current and voltage
  • Control the sequence of the above measurement

Notice

The I2C terminal of CX1000 does not comply with the I2C standard. Since the purpose is to transfer commands to the target device, it is impossible to evaluate the characteristics of the I2C interface using this IP.

When using this IP, be sure to read the precautions in “SDA, SCL (I2C) Bus Specifications” of the CX1000 User’s Manual and check the regular operation to be measured before using it.

Add to Cart

Product GroupAlgorithm IP
CodePCXA01-M1029
Link
ManufacturerADVANTEST CORPORATION
Applicable Equipment
  • CX1000P CX1000_MCU
  • CX1000D CX1000_MCU
  • CX1000D S2-LINK CX1000_MCU

Revisions

Released atNumberDescription
August 14, 20231.01.10
  • Fixed an error that occurred when selecting “Additional Import” in “Import” on the upper tool bar.
  • Fixed an issue where the “Frequency Range” for the FreqMeas command was not set correctly.
  • Fixed an issue where the “Reference Voltage” for the FreqMeas command was not set correctly.
  • The description of this IP was previously described in the “CX1000 User’s Manual”, but the manual has been separated from this revision. Please refer to the file below:
    %PROGRAMFILES%\CloudTesting\doc\MeasureAlgorithm\MeasurementFacilitationByI2C_Package_IP\Measurement_I2C_packageIP_reference_manual-en.pdf
February 02, 20151.01.00
  • Support IP Manager.
  • Change the data log format.
August 07, 20141.00.00

First edition