Reason for revision
Addition of functions, Functional improvement
Addition of functions
General
Required Java version was changed to 8
Now CloudTesting™ Lab requires Java8. Please download and install Java Runtime Environment 8 from Oracle site.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Variables are supported
The variables for measurement parameters can be shared among a work project, And It’s possible to calculate flexibly by using them.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Expert Mode
Expert Mode was supported. The following function can be used. - Advanced Flow Control - Bin/Sort Number - Interpose function
Purchase CloudTesting™ Lab Expert Mode License to use them.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
CT Command
The function that controls CloudTesting™ Lab in command prompt was supported (CT Command). Purchase either of the following licenses to use it. - CloudTesting™ Lab Expert Mode License - OperationWindow for CX1000
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Installer
IP Manager
Automatic installation and authentication for the IPs that you have purchased.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Message display area
Datalog functions
The functions of Datalog were enhanced.
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Setup and Execution
Optimization of the exection time
Execution time was improved 60% in best case(1). (1 It depends on used IPs.)
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Maintenance Program
Addition of function that check condition in Firmware installation.
Addition of function that check Windows Update being applied in Firmware installation .
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F
Functional improvement
Firmware
Failure of the function for the SD Card (CRC/RCA).
When a command that included RCA was inputted to a device, a CRC code was not generated correctly.
- Behavior after improvement
- The CRC code is generated correctly.
- Phenomenon occurs revision
- Rev2.11.00 Rev2.11.01 Rev2.11.02
- Target firmware
- CX1000_MEMORY_TYPE_F
Failure of the function for SD Card (CRC/RCA) in DDR mode.
When a command or data was inputted to a device in DDR mode, RCA and a CRC code were not generated correctly.
- Behavior after improvement
- RCA and a CRC code are generated in accordance with the specifications of SD card.
- Phenomenon occurs revision
- Rev2.11.00, Rev2.11.01, Rev2.11.02
- Target firmware
- CX1000_MEMORY_TYPE_F
Addition and modification of SelfCheck items
By this improvement Following SelfCheck items were added and modified.
Following SelfCheck items were added.
TEST 30388 ALPG DFM CRC DATA DELAY CHECK (1WAY)
TEST 33067 FT TGFC PAT PARALLEL DATA CHECK 3 (1WAY)
TEST 33068 FT TGFC PAT PARALLEL DATA CHECK 4 (2WAY)
TEST 70116 FT CRC/RCA COMBINATION CHECK (1WAY/SDR)
TEST 70117 FT CRC/RCA COMBINATION CHECK (1WAY/DDR)
TEST 70118 FT CRC/RCA COMBINATION CHECK (2WAY/SDR)
Following SelfCheck items were modified.
TEST 30294 ALPG PC JFFI & MATCH PINSEL FUNC CHECK
TEST 30384 ALPG DFM STORE CHECK 15(CRC)
TEST 33091 FT CRC7 GENARATION CHECK 2 (1WAY/DDR)
TEST 33094 FT CRC16 GENARATION CHECK 2 (1WAY/DDR)
TEST 70111 FT RCA FUNCTION CHECK (1WAY/DDR)
- Behavior after improvement
- These SelfCheck items verify the improvement of the firmware.
- Phenomenon occurs revision
- Rev2.11.00, Rev2.11.01, Rev2.11.02
- Target firmware
- CX1000_MEMORY_TYPE_F
Setup and Execution
Power off sequence was changed.
At the ending with power-on, the power supplies are turned off in the same order.
- Behavior after improvement
- At the ending with power-on, the Power supplies are turned off in the reverse order of power on sequence.
- Phenomenon occurs revision
- Rev1.00.00 to Rev2.11.02
- Target firmware
- CX1000_MCU, CX1000_MEMORY_TYPE_F