This document describes CX1000D S2-LINK configuration of CloudTesting™ Station.
CX1000D S2-LINK configuration is a configuration which is connected with two CX1000D by CX1000D S2-LINK cable set.
CX1000D S2-LINK configuration is available on the CX1000_MCU firmware only. It is not available on the MEMORY_TYPE_F firmware.
Requirements
CX1000D S2-LINK configuration is required the following cables and licenses.
| Product | Count |
|---|---|
| CloudTesting™ Lab CX1000D License | 1 |
| CloudTesting™ Lab CX1000D S2-LINK License | 1 |
| FUNC Cable | 8 |
| CONT Cable | 2 |
| CX1000D S2-LINK Cable Set | 1 |
CX1000D S2-LINK capability is only available for linking two CX1000Ds. It cannot link CX1000D and CX1000P or two CX1000Ps.
Measurement Channel
Please refer to the table below for the number of measurement channels which are available on each models.
| Measurement Channel | CX1000P | CX1000D | CX1000D S2-LINK |
|---|---|---|---|
| I/O | 32 | 128 | 256 |
| Power Supply | 2 | 8 | 16 |
| Reference Voltage Supply | 2 | 8 | 16 |
| Arbitrary Waveform Generator | 1 | 4 | 8 |
| Digitizer | 1 | 4 | 8 |