This document describes CX1000_MCU firmware of CloudTesting™ Station.
CX1000_MCU firmware has a functions to measure general semiconductor devices. The feature of CX1000_MCU firmware is the followings:
- Digital Signal Generator of Maximum Frequency 100MHz
- SQPG(Sequencial Pattern Generator)
- SCPG(SCAN Pattern Generator)
- DC Parametric Measure Unit
- Arbitrary Waveform Generator and Digitizer
- Generate trigger signal
- Support I2C bus
- Support CX1000D S2-LINK configuration which is connected with two CX1000D
Specification
The specification of CX1000_MCU firmware is the followings:
Item | Content |
---|---|
Target Device | MCU, Logic IC, Analog IC and sensor IC, etc. |
Maximum Measurement Frequency | 100MHz |
Setting Range of Period Generation | 10ns to 1ms |
Main memory capacity | 128M words/channel |
Measurement Channel
Please refer to the table below for the number of measurement channels which are available on each models.
Measurement Channel | CX1000P | CX1000D | CX1000D S2-LINK |
---|---|---|---|
I/O | 32 | 128 | 256 |
Power Supply | 2 | 8 | 16 |
Reference Voltage Supply | 2 | 8 | 16 |
Arbitrary Waveform Generator | 1 | 4 | 8 |
Digitizer | 1 | 4 | 8 |