Functional Testing IP

Functional Testing IP is an algorithm IP that verifies the functionality of the logical circuit correctly. It is checked that the output matches the expected pattern by applying the pattern to the input pin.

This IP is used for the following measurements.

  • Design verification
  • Characterization
  • Quality assurance
  • Failure analysis
  • Debug of test vectors
  • Sorting work

PCXA01-M1043 Multiple Pattern Execution Plugin for Functional Testing IP is a plugin to enable the feature of Functional Testing IP which executes multiple patterns and acquires the characteristics data. This plugin greatly improves the functional verification efficiency of CX1000.

PCXA01-M1023 Data log extension plugin for Functional Testing IP is a plugin to enable the feature of Functional Testing IP which acquires over 2048 cycles in data log. The maximum number of fail cycles that can be acquired by Functional Testing IP is 2048, but when this plugin is enabled, there is no limit on the maximum number of cycles.

Features

Functional Testing IP has the following functions:

Add to Cart

Product GroupAlgorithm IP
CodePCXA01-M1020
Link
ManufacturerADVANTEST CORPORATION
Applicable Equipment
  • CX1000P CX1000_MCU
  • CX1000D CX1000_MCU
  • CX1000D S2-LINK CX1000_MCU
Shmoo Plot Tool

Logic Analyzer Tool

CATVert-VCD for CX1000

Pattern Viewer Tool

Shmoo Algorithm

Oscilloscope Tool

STILReader for CX1000

Generic Search IP

[Discontinued]CATVert-W for CX1000

Revisions

Released atNumberDescription
March 03, 20222.06.01
October 26, 20202.06.00
May 29, 20202.05.00
June 19, 20192.04.00
February 13, 20182.03.00
May 18, 20172.02.01
  • Fixed the issue that reading fail cycle is not finished when the output of the specified number for fail cycles has been completed in one shot mode.
March 15, 20172.02.00
  • Extended the data log function.

    • Can specify the pin to acquire and the output order.
    • Can output the following information.
      • The number of pattern cycles executed.
      • The last address of Main pattern.
      • The number of first fail address.
      • The number of first fail cycle.
      • The number of failed pins.
      • The number of failed cycles.
      • The number of logged fail cycles.
      • The number of times pattern executed.
  • Added the ability which gets the following data at the post-interpose processing.

    • The last address of Main pattern.
    • The number of pattern cycles executed.
    • The number of fail cycles output to the data log or SCAN data log.
    • The number of times pattern executed.
  • In External Power Supply Control Plugin, fixed an issue which does not send a command including comma (‘,’) on arbitrary command sending function.

December 06, 20162.01.00
  • Supported “power-off control” function on “Flow Item List Area” in Expert Mode.
  • Supported External Power Supply Control Plugin R1.01.00. Please refer to Product Page for details.
  • Fixed the issue which cannot create SCAN Data Log File when specifies pattern name with folder path in [Pattern] tab.
May 13, 20162.00.00
  • Added the ability which gets the following data at the post-interpose processing.
    • First Fail Address
    • First Fail Cycle Number
    • Fail Cycle Count
    • Fail Pin Count
    • Fail Cycle Numbers
    • Pin Results
  • Added the ability which gets the following data in Shmoo Tool/Shmoo Algorithm.
    • First Fail Address
    • First Fail Cycle Number
    • Fail Cycle Count
    • Fail Pin Count
  • Extended the types of the data log format as follows.
    • Standard (Fail Address/Fail Cycle/Pattern Data/Pin Result)
    • Advanced (Fail Address/Fail Cycle/Pattern Instruction/TS No./Pattern Data/Pin Result/)
    • Compact (Fail Cycle/Pin Result)
  • Improved the processing time of the data log function.
    • Change the IP name.
    • New IP name : Functional Testing IP
    • Old IP name : FunctionalMeasure_IP
    • The project that was created in the old IP name is also able to use as it is..
  • Added the AWG Condition tab.
    • The AWG Condition tab is enabled by Arbitrary Waveform Applying Plugin.
    • Arbitrary Waveform Applying Plugin adds the function of applying arbitrary waveform synchronized with pattern to measurement object to algorithm IPs.
    • Please refer to [Product Page][http://www.cts-advantest.com/ja/products/pcxa01-m2200/] for details.
  • Added the External Power Supply tab.
    • The External Power Supply tab is enabled by External Power Supply Control Plugin.
    • External Power Supply Plugin adds the function of applying a voltage from external power supply controlled by GPIB.
    • Please refer to [Product Page][http://www.cts-advantest.com/ja/products/pcxa01-m1039/] for details.
  • Added the Document tab.
    • The Document tab has the buttons for displaying the reference manual and revision history.
June 08, 20151.06.00
  • Added the function which creats the scan data log file for “ScanFF Map for CX1000(PCXT01-M9012)”.
April 21, 20151.05.00
  • Added the high resolution(250ps) timing setting function with “High resolution timing setting plugin for Functional Testing IP(PCXA01-M1034)”.
January 30, 20151.04.00
  • Supported IP Manager.
  • Changed the data log format.
January 15, 20151.03.00
  • Added the function which creates the scan data log file for “LogSynthesis for CX1000(PCXT01-M9007,PCXT01-M9009,PCXT01-M9010)”.
March 11, 20141.02.00
  • Extended the data log function which gets over 2048 fail cycles with “Data log extension plugin for Functional Testing IP(PCXA01-M1023)”.
March 29, 20131.01.00
  • Added the function which selects executing power off after the measurement.
  • Fixed the issue which can not execute the pattern when the pattern executing time is over 15 seconds.
  • Changed the function which does not output the data log during shmoo execution.

Related Post

October 31, 2017
Important Notification about Defect of CloudTesting™ Lab MEMORY_TYPE_F firmware

There are problems in MEMORY_TYPE_F firmware with CloudTesting™ Lab 2.30.02.